Porous triazine polymer: A novel catalyst for the three-component reaction

A new porous triazine-based covalent organic polymer (Triazine-COP) was prepared through the Schiff-base condensation of 2,4,6-tris(4-formyl phenoxy)-1,3,5-triazine and 4,4′-oxydianiline, under sonication. The synthesized Triazine-COP with a high surface area was stable in water and other organic solvents. In the next step, Au (III) ions were immobilized on the nitrogen-rich Triazine-COP that on the reduction with NaBH₄ produced the heterogeneous catalyst of gold clusters in nanosize (Au-NCs@Triazine-COPs). It was applied as an efficient catalyst for the A³ coupling reaction of alkynes, aldehydes with and amines. Both electron-withdrawing/releasing groups produced the corresponding propargylamines with high yields. The high activity of the Au-NCs@Triazine-COPs in this reaction was because of the nanoporous structure of the support that enables the high dispersion and an unhindered open environment for the NCs. The catalyst was reused up to 7 times without significant loss in activity.     

A new quality appearance evaluation technique for automotive bodies including effect of flexible parts tolerances

Part tolerances have a crucial effect on the quality of products. In vehicle design, tolerance analysis is of central importance in quality appearance evaluation of automotive bodies and significantly taken into consideration by manufacturers in recent decades. This paper evaluates the surface quality of a car’s roof as one of the key quality characteristics in vehicle design. Compared to previous research in the area of quality appearance evaluation of automotive bodies, which are based on the assumption of part rigidity, the current research proposes to include part flexibilities in the analysis. The results of this study shows that input tolerances have a considerable effect on the surface quality of the final assembled product.     

Simulation of Structure Change in Porous Media During Gas–Solid Reactions Using Cellular Automata Model

Transport in Porous Media - In some gas–solid reactions, a new solid substance is produced. The product acts as a shield and prevents the collision between gas and solid reactants which...     

Ziziphora clinopodioides Lam leaves aqueous extract mediated synthesis of zinc nanoparticles and their antibacterial,antifungal, cytotoxicity,antioxidant, and cutaneous wound healing properties under in vitro and in vivo conditions

LamZiziphora clinopodioides Biosynthesis of metal nanoparticles using plant medicine is under exploration is due to wide biomedica applications and research interest in nanotechnology, the recent study was assessing green synthesis of zinc nanoparticle using ), the use of plant material Ziziphoraleaves extract (ZnNPs@ not only makes the process eco‐friendly but also the abundance makes it more economical. Also, in this study, Vis. and– were characterized using different techniques including UVZiziphora were synthesized in aqueous medium using the plant extract as stabilizing and reducing agents. The synthesized ZnNPs@Ziziphora conditions. ZnNPs@in vivo and in vitro under Ziziphorawe investigated the therapeutical properties of ZnNPs@ FT‐IR spectroscopy, . SEM images exhibited a uniform spherical morphology in size of 32.34 Thermal Gravimetric Analysis (TGA)ray diffraction (XRD), scanning electron microscopy (SEM), and Energy Dispersive X‐ray Spectrometry (EDS), and‐X Escherichia coli, and Pseudomonas aeruginosa, Salmonella typhimurium part of this study, these nanoparticles indicated excellent antibacterial properties against Gram‐negative bacteria (in vitronm for the biosynthesized nanoparticles. In the biological , andCandida krusei, Candida albicans, Candida glabrata), antifungal potentials against Bacillus subtilis, andStaphylococcus aureus, Streptococcus pneumoniaO157:H7) and Gram‐positive bacteria ( leaves aqueous extract can be used to yield zinc nanoparticles with a significant amount of antibacterial, antifungal, antioxidant, and cutaneous wound healing properties without any cytotoxicity.Z. clinopodioides ointment ameliorated the cutaneous wounds with increasing the levels of wound contracture, vessel, hydroxyl proline, hexosamine, hexuronic acid, fibrocyte, and fibrocytes/fibroblast rate and decreeing the wound area, total cells, and lymphocyte compared to other groups in rats. The results of UV, FT‐IR, XRD, FE‐SEM, EDS, and TGA confirm that the Ziziphora part of our experiment, ZnNPs@in vivo, non‐cytotoxicity effect against human umbilical vein endothelial cells, and antioxidant activity against DPPH. In the biological Candida guilliermondii     

Mammalian cell viability in electrospun composite nanofiber structures

Incorporation of mammalian cells into nanofibers (cell electrospinning) and multilayered cell-nanofiber structures (cell layering) via electrospinning are promising techniques for tissue engineering applications. We investigate the viability of 3T3-L1 mouse fibroblasts after incorporation into poly(vinyl alcohol) nanofibers and multilayering with poly(caprolactone) nanofibers and analyze the possible factors that affect cell viability. We observe that cells do not survive cell electrospinning but survive cell layering. Assessing the factors involved in cell electrospinning, we find that dehydration and fiber stretching are the main causes of cell death. In cell layering, the choice of solvent is critical, as residual solvent in the electrospun fibers could be detrimental to the cells.     

Fischer-Tropsch synthesis over ruthenium-promoted Co/Al2O3 catalyst with different reduction procedures

The effect of reduction procedure on catalyst properties, activity and products selectivity of ruthenium-promoted Co/γ-Al2O3 catalyst in Fischer-Tropsch synthesis (FTS) was investigated. Catalyst samples were reduced with different reduction gas compositions and passivated before being characterized by TPR and XRD techniques. Different activity and product selectivity analyses were also performed. These results showed that the catalyst dispersion, particle size, and the degree of reduction changed with different reduction gas compositions, which were resulted from the water partial pressures in reduction process that give varying degrees of interaction with the support. It has been suggested that the FTS activity of cobalt catalyst was directly dependent on the catalyst reducibility. A reduction gas with a molar ratio of H2/He = 1 was used to prevent the formation of Co-support compound during catalyst reduction.     

Thermal fluctuations in a hyperscaling-violation background

In this paper, we study the effect of thermal fluctuations on the thermodynamics of a black geometry with hyperscaling violation. These thermal fluctuations in the thermodynamics of this system are produced from quantum corrections of geometry describing this system. We discuss the stability of this system using specific heat and the entire Hessian matrix of the free energy. We will analyze the effects of thermal fluctuations on the stability of this system. We also analyze the effects of thermal fluctuations on the criticality of the hyperscaling-violation background.     

Identification of structural systems with full characteristic matrices under single point excitation

The aim of “System Identification” is to determine modal and system properties of structural systems. This is while in “Damage Detection”, the identification of system characteristic matrices is as important as or even more important than the identification of frequency characteristics. Because of various constraints – i.e. difficulties in force excitation of structures due to their large size, geometry, and location – in practice only single excitation and partial measurement, at selected degrees of freedom, is possible. In this paper, a single dynamic load was applied to identify a structural system only along one of the degrees of freedom of the structure. Further, responses corresponding to a few degrees of freedom were also measured. To identify a system with this sort of restricted information, a new approach was introduced enabling identification of the structure?s parameters of mass, damping and stiffness. Taking into account the significant effect of noise reduction in improving system identification accuracy levels, a noise reduction technique was also proposed. The accuracy of the method was also assessed against noise level and location of single excitation. It was shown that as noise level increases, identification errors will also increase (less than 3.5 percent). It was further observed that applying single force at the first storey of the flexural structure would yield the lowest error levels in the identification results. Later, the method?s efficiency and precision were examined through the application of a “closed loop solution” to a six-storey flexural structure, and a four-span Pratt truss. The obtained results showed that the proposed method could act as an effective model in identification of system properties.     

Effects of final-state interactions in pure annihilation decay of B s 0 → π+π −

The hadronic decay of B _s ⁰ → π ⁺ π ^? is analyzed by using “QCD factorization” (QCDF) method and final-state interaction (FSI). First, the B _s ⁰ → π ⁺ π ^? decay is calculated via QCDF method and the annihilation graphs only exist in this method. Hence, the FSI must be seriously considered to solve the B _s ⁰ → π ⁺ π ^? decay and the K ^+(*) K ^?(*) and \(K^{0(*)} K^{\bar 0(*)}\) via the exchange of K ^0(*) and K ^?(*) mesons are chosen for the intermediate states. To estimate the intermediate state amplitudes, the QCDF method is again used. These amplitudes are used in the absorptive part of the diagrams. The experimental branching ratio of B _s ⁰ → π ⁺ π ^? decay is less than 1.2 × 10^?6 and our results according to the QCDF method and FSI are 0.68 × 10^?8 and 1.18 × 10^?6, respectively.     

Invited Paper: Design and modeling of a transistor vertical-cavity surface-emitting laser

A multiple quantum well (MQW) transistor vertical-cavity surface-emitting laser (T-VCSEL) is designed and numerically modeled. The important physical models and parameters are discussed and validated by modeling a conventional VCSEL and comparing the results with the experiment. The quantum capture/escape process is simulated using the quantum-trap model and shows a significant effect on the electrical output of the T-VCSEL. The parameters extracted from the numerical simulation are imported into the analytic modeling to predict the frequency response and simulate the large-signal modulation up to 40 Gbps.